Business Belts Sizing Guide
How to measure your waist with a measuring tape for the perfect fit:
đ TIPS ON MEASURING WITH A TAPE
Wear your best fitting pants (the kind you will use this belt with). Measure your size by running the tape thru the pant loops:
1. Run the tape through your pant loops, just like a belt. Hold the tape taut. Not too tight, not too loose. There should be no slack, no folds along the tape, just like you would wear your belt.
2. Stand upright.
3. Don't try to bend over to see the numbers (might change the reading).
4. Use a mirror to see the reading, or ask someone to read it for you.
5. Now, once you get your most accurate reading, enter it in as your Belt Size (inches). Example: if you get a reading of 36.5", type this number for your Belt Size.
- Enter your current measured size only. If you anticipate a change in your belt size in the future (for example: gaining weight/losing weight) email us to discuss sizing your belt accordingly.
đ BELT DIMENSIONS
Your belt will be sized to fit you perfectly at the center hole. The standard is a 5 hole belt. Distance from the center hole to the tip of the belt is 7 inches, as seen below.
